Technical information on Angular contact ball bearings

Single row angular contact ball bearings

Single row angular contact ball bearings are particularly suitable where:

• bearing arrangements must support combined loads, – i.e. radial and axial loads acting simultaneously
• moderate to high loads are present on one side
• rigid axial guidance is required
• the bearing arrangement must be axially clearance-free or preloaded
• high speeds are required under higher radial and axial loads
• the bearing arrangement is to run quietly in addition to meeting the requirements stated above

Angular contact ball bearings: speed comparison with tapered roller bearings nG =  limiting speed

Want to find out more about our Single row angular contact ball bearings?

You will find detailed technical information in our knowledge center:

Double row angular contact ball bearings

Double row angular contact ball bearings are particularly suitable where:

• the design envelope is not sufficient under high loads for a pair of single row angular contact ball bearings
• high radial and axial loads are acting simultaneously
• tilting moments must also be supported
• a relatively rigid bearing arrangement is required
• the bearing arrangement is to run quietly in addition to meeting the requirements stated above

Double row angular contact ball bearing –  comparison of design envelope with bearing set composed of single row angular contact ball bearings B = total width of bearing or bearing set

Want to find out more about our Double row angular contact ball bearings?

You will find detailed technical information in our knowledge center: