Technical Information on Axial angular contact ball bearings

Bearing design

Precision bearings for screw drive bearing arrangements

Axial angular contact ball bearings are precision bearings for screw drive bearing arrangements. Depending on the series, they can support radial forces as well as axial forces in one or both directions. Contact seals protect the rolling element system against contamination and moisture. For higher speeds, non-contact minimal gap seals can be used.

With and without fixing holes

The bearings are available with and without fixing holes in the outer ring. Bearings with holes are screw mounted directly on the adjacent construction. This solution is particularly economical since there is then no need for the locating bore that would otherwise be required or for the bearing cover with the associated matching work.

Available with less stringent tolerances

For some areas of application, a bearing arrangement of lower precision is often sufficient. For this purpose, bearings with less stringent tolerances are available.

Axial angular contact ball bearings, double row, with fixing holes

 
With lip seals or minimal gap seals ZKLF..-2RS, ZKLF..-2Z, ZKLF..-2RS-PE

 
Matched pair ZKLF..-2RS-2AP

Want to find out more about our Axial angular contact ball bearings?

You will find detailed information in our knowledge center:

    カスタマーサービス問い合わせ先 注意事項 Privacy
    クッキーポリシー 利用条件 国の選択を変更する
Schaeffler Japan Co.,Ltd.
Schaeffler R&D Center Bldg., Yokohama Business Park 134 Godo-cho, Hodogaya-ku
Yokohama, Yokohama 240-0005, JAPAN

© Schaeffler Japan Co. Limited